|
IP Explorer Professional (NEW) 
$140.00 plus Free Shipping!
Enhanced IP Address Detector, BOOTP/DHCP Server
Don't know the PLC IP address? This handheld will read it from the attached device in an instant.
With the IP Explorer Professional you no longer have to struggle with Firewalls, Blocked ports, Anti-viruses and VPN software. Assign IP address in seconds, no computer required!
Don't want your maintenance crew to wake you up in the middle of the night to replace broken Ethernet module?
This device will save you the trip and reduce the plant downtime!
Overview:
Designed for BOOTP/DHCP enabled Ethernet/IP devices.
Portable and battery powered, always ready in a second.
Simple four button control
Can detect IP address of most industrial control devices
It replaces your computer based BOOTP/DHCP Server and will quickly assign any IP address to any industrial BOOTP or DHCP enabled control device, like Programmable Controller, PLC communication modules, smart switches and I/O adapters.
Tested with a wide range of controllers but generally supports any BOOTP/DHCP enabled device (see below lineup of controller models and series)
Functionality
Unknown IP detection:
IP Explorer Professional can detect an unknown IP address of an Ethernet device.
Simply connect a cable and wait for detection. (This function possibly requires a power cycle of target device)
IP address selection:
IP address can be selected from the list of previously used addresses or specified by user.
IP Explorer Professional remembers last 10 addresses used.
DHCP/BOOTP Requests:
IP Explorer Professional will service a standard BOOTP or DHCP request.
The target device MAC address will appear on the screen.
Static IP Address Replace:
For Ethernet/IP enabled devices IP Explorer Professional can replace current target address with a new address without resetting to BOOTP or DHCP
Target device must comply with Ethernet/IP CIP specification to accept this command.
Set Static/Dynamic:
For Ethernet/IP enabled devices the IP Explorer Professional can set IP address as Static or enable Dynamic
addressing (enable BOOTP or DHCP).
Target device must comply with Ethernet/IP CIP specification to accept this command.
Battery and Cables:
IP Explorer Professional connects directly to the target device through a standard straight through patch cable (not included).
IP Explorer Professional uses two AA size batteries (not included). Rechargeable Ni-MH batteries recommended.
Warranty: One-year repair/replacement/firmware upgrades.
Partial list of compatible controllers:
- Logix: 1756-ENBT, 1756-EN2T, 1768-ENBT, 1769-L32E, 1769-L35E
- PLC5: 1785-L20E, 1785-L40E, 1785-L80E, 1785-ENET
- SLC: 1747-L551, 1747-L552, 1747-L553, SLC 5/05
- Micrologix 1100: 1763-L16AWA, 1763-L16BWA, 1763-L16BBB
- Flex I/O: 1788-ENBT, 1794-AENT
- Point I/O: 1734-AENT, 1738-AENT $175.00 plus Free Shipping! |
